PCI Repafix®
Repair and molding mortar
for concrete floors, stairs and walls
Areas of application
- For indoor and outdoor use.
- For walls and floors.
- Repair of worn-down steps and spalled stair nosings.
- Filling break-outs and holes in screeds, concrete ceilings, supports and balcony slabs.
- Filling pipe grooves in concrete walls, cavities between concrete and steel door frames etc.
- For leveling steps.
- For reprofiling works.
- For forming covings.
- For layer thickness from 2 - 50 mm.
Product features
- Waterproof, resistant to weather conditions and frost, all-purpose use indoors and out.
- Creamy and workable consistency after addition of water, easy to apply.
- Fast setting, walkable after approx. 90 minutes, able to bear weight after 24 hours.
- Reliable adhesion to concrete, render, screed and masonry.
- High non-sag properties, well suitable for reprofiling and molding.
- High compressive strength, can be exposed to pedestrian and vehicular traffic.
Colors:
grey
Forms of delivery:
25-kg-bag/ 5-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
25-kg-bag
pieces
5-kg-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
References
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Safety data sheet
Declaration of performance EN 998-1 (GP CS IV)
Classification report EN 13501-1 (E)
Combined with product:
PCI Repafix®
