PCI Pecilastic® W-Lim
Special adhesive
for bonding PCI Pecilastic W waterproofing membrane
Areas of application
- For indoor use.
- For walls and floors.
- For bonding the waterproofing membrane PCI Pecilastic W to the substrate.
- For reliably bonding the joints and overlaps of the PCI Pecilastic W waterproofing membrane.
- For reliably bonding the PCI Pecitape waterproofing tapes, waterproofing corners and waterproofing collar.
- For use in private areas, in hotels and areas with similar use.
Product features
- PCI Pecilastic W Lim sets reliably and quickly under PCI Pecilastic W waterproofing membrane, PCI Pecitape waterproofing tapes and PCI Pecitape waterproofing collars and results in a functional, impermeable waterproofing system.
- PCI Pecilastic W Lim is flexible and has good resistance to aging.
- Creamy consistency, can be easily applied with a roller, brush or notched trowel.
- Long processing time.
- Quick work sequence due to long open time, especially when applying with a roller.
- PCI Pecilastic W-Lim has been tested and approved in the system with the PCI Pecilastic W waterproofing membrane in accordance with the guideline for European technical approval ETAG 022 - Part 2: Kits with waterproofing membranes.
- PCI Pecilasic W-Lim / PCI Pecilastic W meets the W0-I to W2-I requirements of DIN 18534.
- Very low emissions - GEV EMICODE EC1 PLUS.
Forms of delivery:
10-kg-set/ 5-kg-bag/ 5-kg-pail
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
10-kg-set
pieces
5-kg-bag
pieces
5-kg-pail
pieces
Your Result
Quantity Required approximately
kg
corresponds
10-kg-set
pieces
5-kg-bag
pieces
5-kg-pail
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Safety data sheet
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI Pecilastic® W-Lim
European Technical Assessment EAD 030436-00-0503
Combined with product:
PCI Pecilastic® W-Lim
