PCI Gisogrund® Rapid
Fast-acting primer
for cementitious and gypsum-based substrates
Areas of application
- For indoor and outdoor use.
- For walls and floors.
- For priming cement screeds, calcium sulfhate screeds, concrete, aerated concrete, masonry, mineral plaster, building boards, gypsum blocks, plasterboards and gypsum fiberboards as a preparatory treatment before laying ceramic tiles.
- For priming concrete floors, cement screeds, calcium sulfate screeds before applying flowable PCI floor levelers as well as non-sag floor levelers and other mortars which set through hydration.
Product features
- Solvent free to TRGS 610; Giscode D 1.
- Very low emissions, GEV-EMICODE EC 1.
- EU 2004/42/IIA(g)(50/30): < 2 g/l.
- Fast acting to form a film layer, mineral substrates can be covered with PCI tile adhesives or PCI levelers after 5 minutes.
- Reliable adhesion, PCI tile adhesives and PCI levelers reliably bond to surfaces primed with PCI Gisogrund Rapid.
- Protects thin-bed mortar or leveling material from too rapid loss of water, increases the open time, improves adhesion and helps prevent the formation of shrinkage cracks.
- Prevents the formation of bubbles and rapid loss of water when leveling substrates.
- Ready to use.
- Pink dye enables control of surface coverage.
- Very little splashing during the application.
- Complies with the guidelines of Bundesverband der Gipsbauplatten- und Gipsindustrie (federal association of gypsum building board and gypsum industries) and DIN 18157-1.
Colors:
pink
Forms of delivery:
10-l-canister/ 5-l-canister/ 1-l-bag
Consumption calculator
Your Result
Quantity of resources required in approximately
l
corresponds
10-l-canister
pieces
5-l-canister
pieces
1-l-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Safety data sheet
Licensing GEV EMICODE (EC1)
Combined with product:
PCI Gisogrund® Rapid
