PCI FT® Extra
Polymer-modified tile adhesive
for all ceramic tiles
Areas of application
- For indoor and outdoor use.
- For walls and floors.
- For laying non-vitrified tiles, vitrified tiles and fully-vitrified tiles on PCI bonded waterproofing such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid, PCI Pecilastic W and PCI Apoflex F/W.
- On cement screeds, rough-ground anhydrite screeds, flowable plaster screeds, render, concrete, heated screeds, mastic asphalt (only indoors), plasterboards, gypsum fiber boards, gypsum planks and plaster.
- For polyurethane foam boards on external basement walls in contact with soil (perimeter insulation) on plaster/render, concrete, brickwork and bonding slurries.
- For mineral fiber boards, e.g. Isover or Rockwool.
- For cut rigid foam boards, e.g. EPS.
- For extruded rigid foam boards, e.g. XPS.
- For adhesive bed thickness from 1 to 10 mm.
Product features
- High moistening properties, even suitable for fully-vitrified tiles and on low-absorbent substrates (e. g. smooth-cast concrete surfaces).
- Flexible.
- Non-sag properties, no wedging necessary. The bedded tiles immediately bond but can still be adjusted to correct position.
- Good workability, therefore easy to apply.
- Meets
- the guideline "Flexible mortar" issued by Deutsche Bauchemie e.V. (German Construction Chemicals Industry),
- the classification C2 TE S1 to DIN EN 12004 - Very low emissions, GEV EMICODE EC1 PLUS.
Colors:
grey
Forms of delivery:
25-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
25-kg-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Safety data sheet
Declaration of performance EN 12004 (C2TE S1)
Sustainability data sheet
Test report ISO 13007-1 (C2TE)
Combined with product:
PCI FT® Extra
Classification report EN 13501-1 (A1fl)
Combined with product:
PCI FT® Extra
Classification report EN 13501-1 (A1)
Combined with product:
PCI FT® Extra
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI FT® Extra
UK Declaration of Conformity BS EN 12004 (C2TE S1)
Combined with product:
PCI FT® Extra
