PCI Flexmörtel® S1 Rapid
Flexible tile adhesive
for all ceramic coverings
Areas of application
- For indoor and outdoor use.
- For walls and floors.
- For the flexible laying of tiles.
- For laying natural stones.
- For laying cement screeds with a residual moisture ≤4% CM.
- For laying ceramic tiles on all types of PCI bonded screeds.
- For laying tiles on a heated screed.
- For laying tiles in swimming pools, pool surrounds, wet rooms and cold storage depots.
- For laying tiles on mastic asphalt screed (only indoors) and all cement-based and gypsum-based substrates, glass mosaic and porcelain mosaic, firmly bonding PVC coverings and old ceramic coverings.
- For laying polyurethane foam boards at basement walls in contact with the ground (perimeter insulation) on render/plaster, concrete, brickwork and waterproofing slurry; for mineral fiber boards (e.g. Isover or Rockwool), for cut rigid foam boards (e.g. polystyrene), for extruded rigid foam boards.
- For the repair of irregular walls and floors prior to laying tiles and slabs.
Test certificates are available at www.pci-augsburg.eu
Product features
- Meets C2FT S1 requirements to DIN EN 12004 and the "guideline for flexible mortar".
- Flexible, compensates elongations in the substrate due to variations in temperature and shrinkage.
- Effective crystalline water binding.
- For adhesive bed thickness from 1 to 10 mm.
- Very low emissions, GEV-EMICODE EC 1 PLUS.
- Low in chromates to TRGS 613.
- Waterproof and temperature resistant from -30 °C to +80 °C, multi-purpose use indoors and out on walls and floors.
Colors:
grey
Forms of delivery:
20-kg-bag/ 5-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
20-kg-bag
pieces
5-kg-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Safety data sheet
Declaration of performance EN 12004 (C2FT S1)
Sustainability data sheet
Flexible tile adhesives from PCI
Pocket folder - PCI Flexmörtel line
Flyer - PCI Flexmörtel S1 Rapid
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI Flexmörtel® S1 Rapid
UK Declaration of Conformity BS EN 12004 (C2FT S1)
Combined with product:
PCI Flexmörtel® S1 Rapid
